The University of Dublin | Trinity College -- Ollscoil Átha Cliath | Coláiste na Tríonóide
Trinity's Access to Research Archive
Home :: Log In :: Submit :: Alerts ::

TARA >
School of Engineering >
Mechanical & Manufacturing Eng >
Mechanical & Manufacturing Eng (Scholarly Publications) >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2262/64317

Title: A Decrement Method for Quantifying Nonlinear and Linear Damping in Multidegree of Freedom Systems
Author: MESKELL, CRAIG
Author's Homepage: http://people.tcd.ie/cmeskell
Keywords: nonlinear damping
linear damping
freedom system
Issue Date: 2011
Citation: C. Meskell, A Decrement Method for Quantifying Nonlinear and Linear Damping in Multidegree of Freedom Systems, ISRN Mechanical Engineering, 2011 (2011), 659484, 2011
Series/Report no.: ISRN Mechanical Engineering
2011 (2011)
659484
Abstract: A method is presented which can estimate the linear and nonlinear damping parameters in a lightly damped multidegree of freedom system which allows the system to be decomposed into a set of single degree of freedom nonlinear systems. Only a single response measurement from a free decay test is required as input ensuring that the magnitude of the damping parameters is not compromised by phase distortion between measurements. The response is band-pass filtered in the time domain, around each of the natural frequencies. While this provides a free response measurement for each mode, it introduces a restriction as the natural frequencies must be distinct and separated. The instantaneous energy of each trace is used to describe the long-term evolution of the mode. This is achieved by using only the peak amplitudes in each period, and so the stiffness and inertial forces are effectively ignored, and only the damping forces are considered. Thus, the method is not unlike the familiar decrement method, which can estimate the viscous damping in linear systems. The method is developed for a weakly nonlinear, lightly damped two-degree-offreedom system, with both linear and Coulomb damping. Simulated response data is used to demonstrate the accuracy of the technique.
Description: PUBLISHED
URI: http://dx.doi.org/10.5402/2011/659484
http://hdl.handle.net/2262/64317
Appears in Collections:Mechanical & Manufacturing Eng (Scholarly Publications)

Files in This Item:

File Description SizeFormat
meskell - isrn - 2011.pdfPublished (publisher's copy) - Peer Reviewed751.6 kBAdobe PDFView/Open


This item is protected by original copyright


Please note: There is a known bug in some browsers that causes an error when a user tries to view large pdf file within the browser window. If you receive the message "The file is damaged and could not be repaired", please try one of the solutions linked below based on the browser you are using.

Items in TARA are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback