Browsing Mechanical & Manufacturing Eng (Scholarly Publications) by Title
Now showing items 489-508 of 677
-
Part 1: scaffolds and surfaces.
(Elsevier, 2008)Every day thousands of clinical procedures are performed to replace or repair tissues in the human body that have been damaged through disease or trauma. Current therapies are focused on the replacement of the damaged ... -
Particle Image Velocimetry (PIV) of Cold Spray of particles in supersonic nozzles
(Trinity Centre for Bioengineering, 2015) -
Particle sizing and flow measurements in an atomising mist jet nozzle: a Shadowgraphy approach
(2010)Particle sizing and velocity measurements are undertaken in an atomizing water mist jet impinging onto a heated copper plate. This study forms part of an investigation into the heat transfer and flow field obtained from ... -
Particle speed analysis in CoBlast
(2015)The deposition of well-adhered thin type of coatings is of great importance in manufacturing and is used in numerous applications. Of particular interest in the biomedical sector is the deposition of hydroxyapatite onto ... -
Pedestrian Risk from Cars and Sport Utility Vehicles - A Comparative Analytical Study
(2006)Analysis of real-world crash data from the USA shows that 11.5 per cent of pedestrians struck by large sport utility vehicles (SUVs) are killed, compared with 4.5 per cent of pedestrians struck by passenger cars. The ... -
PEDOT:PSS interfaces stabilised using a PEGylated crosslinker yield improved conductivity and biocompatibility.
(2019)The rapidly expanding fields of bioelectronics, and biological interfaces with electronic sensors and stimulators, are placing an increasing demand on candidate materials to serve as robust surfaces that are both biocompatible, ... -
Performance analysis of a prototype small scale electricity-producing biomass cooking stove
(2015)An electrical generator has been integrated with a locally produced, biomass-fed clay cooking stove in rural Malawi. The generator produces small amounts of electricity based on the thermoelectric effect. Five demonstrator ... -
Performance characterization of Ni60-WC coating on steel processed with supersonic laser deposition
(2015)Ni60-WC particles are used to improve the wear resistance of hard-facing steel due to their high hardness. An emerging technology that combines laser with cold spraying to deposit the hard-facing coatings is known as ... -
Performance evaluation of thermoelectric generators under cyclic heating
(2021)The effect of thermal cycling on thermoelectric generator (TEG) performance is investigated for six nominally identical samples subjected to the same heating cycle profile. All TEGs experienced performance degradation, ... -
PERFORMANCE OF A CLOSED CYCLE POWER TAKE OFF FOR MUTRIKU BREAKWATER
(2022)An oscillating water column (OWC) type wave energy converter was installed in Mutriku breakwater (Basque Country, Spain). The wave power is transferred to an air flow that turns a turbine. The facility currently uses ... -
Performance of a Closed Cycle Power Takeoff for a Shore-Based Wave Energy Device
(2023)A promising class of devices for ocean wave energy conversion is called the oscillating water column in which the wave power is transferred to an airflow that rotates a turbine. A closed cycle power takeoff (CCPTO), in ... -
The pericellular environment regulates cytoskeletal development and the differentiation of mesenchymal stem cells and determines their response to hydrostatic pressure.
(2013)The objective of this study was to examine the interplay between matrix stiffness and hydrostatic pressure (HP) in regulating chondrogenesis of mesenchymal stem cells (MSCs) and to further elucidate the mechanotransductive ... -
Perspectives on the Mechanics of Fracture and Biological Materials
(Lulu Publishing, 2022) -
Physically short crack propagation in metals during high cycle fatigue
(Elsevier, 2009)In metals, during high cycle fatigue on plain specimens, almost the entire fatigue life is spent as short crack initiation and propagation. The fatigue short crack life can be schematically divided into two subsequent ... -
Plume Characterisation of a Single Source Electrospray for Micro Electronic Cooling
(2014)Development and optimization of two phase electrospray cooling is an undeveloped topic, in part due to unavailable knowledge of how the various electrical, geometrical, thermal and hydraulic parameters influence both ... -
Pore-forming bioinks to enable spatio-temporally defined gene delivery in bioprinted tissues
(2019)The regeneration of complex tissues and organs remains a major clinical challenge. With a view towards bioprinting such tissues, we developed a new class of pore-forming bioink to spatially and temporally control the ... -
Porous decellularized tissue engineered hypertrophic cartilage as a scaffold for large bone defect healing
(2015)Clinical translation of tissue engineered therapeutics is hampered by the significant logistical and regulatory challenges associated with such products, prompting increased interest in the use of decellularized extracellular ... -
Porous poly(vinyl alcohol)/sepiolite bone scaffolds: preparation, structure and mechanical properties
(Elsevier, 2012)Porous poly(vinyl alcohol) (PVA)/sepiolite nanocomposite scaffolds containing 0-10 wt.% sepiolite were prepared by freeze-drying and thermally crosslinked with poly(arylic acid). The microstructure of the obtained scaffolds ...
