A validated computational fluid dynamics methodology for characterisation of fluid flow and heat transfer in unsteady jets
Citation:Sajad Alimohammadi, 'A validated computational fluid dynamics methodology for characterisation of fluid flow and heat transfer in unsteady jets', [thesis], Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2016
Alimohammadi, Sajad_Thesis_11Feb2016.pdf (PDF) 15.34Mb
To improve reliability and avoid premature failure in electronic devices, more effective techniques must be used to dissipate the heat generated by devices. Thermal simulations can enable engineers to investigate and verify appropriate techniques at a very early stage of the design of the electronic device. It helps to improve cooling techniques by providing a visual representation of the complicated heat dissipation phenomenon inside the device. Due to high heat transfer coefficients and the enhanced efficiency, impinging jets are known as a desirable method of heat removal. This thesis reports on a comprehensive project which aimed to establish and validate a robust yet low-cost computational fluid dynamics (CFD) methodology to predict the fluid flow and heat transfer of steady and unsteady impinging jets, using in-house detailed experimental measurements for validation. A major focus in this study is on improving the accuracy of unsteady heat transfer simulations. This is done through three major stages, namely, steady jets, pulsating jets, and synthetic jets. The idea is to investigate these three stages considering the incremental progression of complexity in the flow configurations. This can lead to a modelling methodology which is capable of handling a wide range of application and conditions, e.g. steady or unsteady jets, free or impinging jets, and fixed or moving geometries. For steady jets, one of the main goals is to show that the model is valid for a wide range of operational and geometrical parameters, while keeping the computational cost low. The motivation in the second stage for pulsating jets is to characterise the stagnation and area-averaged enhancements (or degradations) in convective heat transfer rate achieved by an unsteady flow such as pulsating jet, when compared to a steady jet, for an extended range of operating conditions. The results is analysed in terms of the effect of different key parameters. This is accomplished by developing fitted correlations as functions of groups of modified dimensionless numbers that best collapse the averaged and stagnation heat transfer enhancement. At the final stage, the most complicated case of unsteady synthetic jet with a moving geometry is studied. The formation, evolution and interaction of a pair of adjacent synthetic jets is investigated numerically using computational fluid dynamics and experimentally using particle image velocimetry (PIV). Full jet cavity simulations incorporating the diaphragm motion is performed using Mesh Deformation techniques. The results for both cases of phase-locked and out-of-phase jet flows are compared versus PIV measurements. This leads to a better understanding of the fluid mechanics of adjacent synthetic jets and delivers a theoretical basis to be used in the future for their application.
Author: Alimohammadi, Sajad
Advisor:Murray, Darina B.
Qualification name:Doctor of Philosophy (Ph.D.)
Publisher:Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering
Note:TARA (Trinity’s Access to Research Archive) has a robust takedown policy. Please contact us if you have any concerns: email@example.com
Type of material:thesis
Availability:Full text available