The University of Dublin | Trinity College -- Ollscoil Átha Cliath | Coláiste na Tríonóide
Trinity's Access to Research Archive
Home :: Log In :: Submit :: Alerts ::

TARA >
PEER Project >
PEER Publications >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2262/65710

Title: Local Strain In A 5 – Harness Satin Weave Composite Under Static Tension: Part Ii – Meso-Fe Analysis
Keywords: A. Textile composites
D. Local strain analysis
D. Meso-FE modeling
D. embedded sensors
D. Digital image correlation
Issue Date: 29-May-2011
Publisher: Elsevier
Abstract: Abstract This paper presents the local strain analysis in a thermoplastic 5-harness satin weave composite under uni-axial static tensile load using meso-FE simulations. In order to predict the local strain profiles as observed in the experiments (Part I) at various locations of the composite, different unit cell stacking models with appropriate boundary conditions are used for the FE analysis. Apart from the calculation of local strain values at different locations (inside / traction free surface) of the composite laminate, the aim of the numerical simulations is to understand the ‘shadowing’ effects of the internal ply shifting on the surface strain behaviour of a 5-harness satin weave composite. Comparison of the experimental local strain values (Part I) at various locations of the satin weave composite reveals that the effects of local yarn constraints are negligible on the local longitudinal strain behavior of the composite. However, local stress-strain profiles obtained from unit cell meso-FE simulations indicate that the longitudinal strain and the transverse stress distribution in the weft yarn at the yarn crimp location is sensitive to the unit cell stacking as well as to the applied boundary conditions to the unit cell.
URI: http://hdl.handle.net/2262/65710
ISSN: 02663538 (ISSN)
DOI: 10.1016/j.compscitech.2011.03.020
Rights: 2011
Affiliation: Ghent University, Dept. of Materials Science and Engineering - Sint-Pietersnieuwstraat 41--> , B- 9000 Gent--> - BELGIUM (Daggumati, S.)
BELGIUM (Daggumati, S.)
Ghent University, Dept. of Materials Science and Engineering - Sint-Pietersnieuwstraat 41--> , B- 9000 Gent--> - BELGIUM (Van Paepegem, W.)
Ghent University, Dept. of Materials Science and Engineering - Sint-Pietersnieuwstraat 41--> , B- 9000 Gent--> - BELGIUM (Degrieck, J.)
Ghent University - IbiTech-bioMMeda--> , Campus Heymans-Block B--> , De Pintelaan 185--> , B-9000 Gent--> - BELGIUM (Praet, T.)
Ghent University - IbiTech-bioMMeda--> , Campus Heymans-Block B--> , De Pintelaan 185--> , B-9000 Gent--> - BELGIUM (Verhegghe, B.)
Katholieke Universiteit Leuven, Department of Metallurgy and Materials Engineering - Kasteelpark Arenberg 44--> , B-3001 Leuven--> - BELGIUM (Xu, J.)
Katholieke Universiteit Leuven, Department of Metallurgy and Materials Engineering - Kasteelpark Arenberg 44--> , B-3001 Leuven--> - BELGIUM (Lomov, S.V.)
Katholieke Universiteit Leuven, Department of Metallurgy and Materials Engineering - Kasteelpark Arenberg 44--> , B-3001 Leuven--> - BELGIUM (Verpoest, I.)
Appears in Collections:PEER Publications

Files in This Item:

File Description SizeFormat
PEER_stage2_10.1016%2Fj.compscitech.2011.03.020.pdf3.05 MBAdobe PDFView/Open


This item is protected by original copyright


Please note: There is a known bug in some browsers that causes an error when a user tries to view large pdf file within the browser window. If you receive the message "The file is damaged and could not be repaired", please try one of the solutions linked below based on the browser you are using.

Items in TARA are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback