Sort by: Order: Results:

Now showing items 28-47 of 131

  • Bubble impingement and the mechanisms of heat transfer enhancement 

    Donoghue, David B (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2014)
    Fluid agitation and mixing ensuing from two phase flow has an important role to play within two phase flow heat exchangers, which are at the forefront of energy conversion. Within these environments, vapour bubbles may ...
  • Bubble-induced Marangoni convection 

    O'Shaughnessy, Séamus (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2011)
    Thermal Marangoni convection about a 1mm radius air bubble situated under a heated wall of constant temperature immersed in a silicone oil layer (Pr = 220) of constant depth 5mm was experimentally investigated using a flow ...
  • Cartilage extraceullular matrix-derived scaffolds for joint regeneration 

    Vazão de Almeida, Henrique Martiniano (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2016)
    The goal of this thesis was to address key limitations associated with autologous chondrocyte implantation (ACI) for articular cartilage regeneration, specifically the need for two hospital stays, cell culture and high ...
  • Cartilage extraceullular matrix-derived scaffolds for joint regeneration 

    Almeida, Henrique Martiniano Vazão de (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2016)
    The goal of this thesis was to address key limitations associated with autologous chondrocyte implantation (ACI) for articular cartilage regeneration, specifically the need for two hospital stays, cell culture and high ...
  • Case study of the Home Energy Saving Scheme : a multidisciplinary approach 

    Byrne, Amiee Jennifer (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2014)
    The EU has set itself the objective of achieving 20% primary energy savings by 2020. Because of the relatively recent move towards sustainability, there is a limited understanding of how effective related policies and ...
  • Characterisation and modelling of electro-pneumatic production systems 

    Harris, Paul (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2011)
    Compressed air is a widely employed energy source in modern manufacturing, accounting for a large percentage of plant electrical energy usage. However, the energy efficiency of such systems can be particularly low. Accurate ...
  • Characterisation and Reduction of Aircraft Landing Gear Noise 

    NERI, ELEONORA (Trinity College Dublin. School of Engineering. Discipline of Mechanical & Manuf. Eng, 2017)
    Aircraft noise has become an important concern in aviation design as it has a negative impact on the health of people living in the vicinity of airports. The total noise of an aircraft is generated by the engines and by ...
  • Characterisation of the performance of single point diamond dressers in abrasive processes 

    Murphy, Stuart (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2014)
    This thesis presents in-depth investigation and analysis of the dressing of conventional grinding wheels. Grinding is used in the manufacturing industry to achieve a high surface finish which is an important constituent ...
  • Composition and mechanical properties of osteoarthritic subchondral trabecular tibial bone 

    Gleeson, John Patrick (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2007)
    Osteoarthritis is a disease that has been characterised historically by the focal destruction of cartilaginous tissue and hence, is defined as such. However, recent investigations have brought this pathology into contention. ...
  • Computational and experimental investigation of bone cell response to mechanical stimuli 

    McGarry, James Gerard (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2006)
    The importance of mechanical loading in maintaining bone quality is well illustrated by the drastic effects of its absence in, for example, microgravity, cast immobilisation or paraplegia. The mechanisms underlying adaptation ...
  • Computational investigations of mesenchymal stem cell ageing in mechanobiological simulations of tissue differentiation 

    Xue, Feng (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2014)
    Musculoskeletal health is a major determinant of the quality of life for the increasing aged population groups in our society. Improved healthcare is essential to ensure successful ageing and enhanced musculoskeletal health ...
  • Computational investigations of variability in mechanobiological simulations of tissue differentiation 

    Khayyeri, Hanifeh (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2012)
    Theories of mechanoregulation have been integrated in computational models of mechanobiological experiments to test hypotheses of mechanobiology. It is believed that computational models need to be improved by considering ...
  • Computational simulation of the mechanobiological response of arterial tissue 

    Boyle, Colin James (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2012)
    Ischaemic heart disease, causing restriction of arterial blood flow to the heart tissue, can be treated with mechanical revascularisation treatments such as balloon angioplasty and stent implantation. One remaining limitation ...
  • Cooling by high speed air jet in orthogonal machining operations 

    Bareggi, Andrea (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2012)
    Changing environmental awareness has led manufacturing industry to give critical consideration to the use of conventional coolants and traditional cooling techniques in machining processes. Current research shows that ...
  • Design, manufacture, modelling and testing of surface acoustic wave strain sensors 

    Mc Cormack, Brian (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2008)
    There is an increasing demand for multi-sensor strain measurement systems, particularly those which incorporate wireless sensors. A possible application of such a system is the Real-Time Weigh-In-Motion (RTWIM) of heavy ...
  • Development of mechanobiomimetic strategies to drive stem cell behaviour for bone regeneration 

    EICHHOLZ, KIAN (Trinity College Dublin. School of Engineering. Discipline of Mechanical & Manuf. Eng, 2019)
    There are a host of cases where clinical intervention must be taken to treat diseased or damaged bone, including severe fractures, defects, tumours requiring tissue removal, and debilitating diseases such as osteoporosis. ...
  • Development, modelling and characterization of metal micro-textured thermal interface materials 

    Kempers, Roger (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2010)
    A metal micro-textured thermal interface material (MMT-TIM) has been developed to address the shortcomings of conventional TIMs. In the present study, the MMT-TEVIs consist of silver foils with raised, small-scale, hollow ...
  • EHD augmentation of convective boiling within a transparent heat exchange 

    McGranaghan, Gerard Joseph (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2013)
    This work investigated the influence of electrohydrodynamic forces on the two-phase flow patterns of HFE7000 refrigerant under convective boiling conditions. A flow loop was constructed which featured two novel transparent ...
  • Engineering tissues with a zonal structure and composition mimicking native articular cartilage 

    Luo, Lu (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2015)
    Engineering cartilage grafts with comparable functionality to the native tissue remains a major challenge in the field of regenerative medicine. The overall goal of this thesis was to engineer a cartilage graft with ...
  • Experimental investigations in turbomachinery noise-source identification 

    Davis, Ian (Trinity College (Dublin, Ireland). Department of Mechanical and Manufacturing Engineering, 2014)
    The exact contribution of each of the various core-noise sources within modern turboshaft engines to the noise radiated from the engine exhaust and into the surrounding environment is poorly understood. The objective of ...